McFarlane Aviation Products ORDER ONLINE NOW!
Or Call 1-866-920-2741
M-TH 7:30am-5:30pm CT
F 7:30am-5:00pm CT
Quick Search      Search Tips

Your Shopping Cart
You Have 0 Items in Your Cart
Subtotal  $0.00
View Cart Check Out Help
Login Package Tracking Purchase Options
Part Number: MC0442506-8
Description: STOP LUG, Torque Link
PMA Supplement 79
Qty per Aircraft:
Unit of Measure: EACH
Retail Price: $1,025.15
Inventory Status: Stock
Your Discount Price: $235.13

Please verify eligibility for your aircraft
Product Image


Torque Link Stop Lugs and Safety Plate
Replace worn out stop lugs to reduce drag? Really?

This often overlooked but important part is affordable at McFarlane!
The torque link stop lug is a sacrificial part that hammers against a flat spot on the lower part of the shock strut outer tube when the strut extends after takeoff. This prevents the strut from overextending and forces the nose wheel and rudder system into proper alignment for flight.

Due to repeated hammering with every takeoff, these stop lugs must be periodically replaced. Excessive wear can allow overextension of the strut. They also often wear unevenly resulting in inconsistent alignment of the nose wheel in flight which then causes extra drag and yaw. The extra yaw can require increased rudder trim which causes even more drag. So yes, replacing a torque link stop lug can reduce drag!

  • Safety plate features bend up tabs to secure stop lug bolts
  • Super tough 4130 alloy steel for corrosion resistance
  • Kits include stop lug, safety plate and applicable 3/16" bolts

Other nose wheel steering parts:




    Maintenance Tip:
    Replace the stop lug if it is no longer flush with the strut, mushroomed, worn, rounded, bent away from the torque link, or if it has stress cracks. The safety plate should not be reused.




    More important than you think
    Overextension of the nose strut due to a worn out stop lug can lead to a cascade of problems. McFarlane A&P mechanics have seen struts over extend to the point where the metering pin comes out of the orifice. This results in loss of dampening action and the pin hammering the orifice every landing, and distorting and enlarging it. Over time, the excess nose strut travel and lack of dampening can result in fatigue cracks in the torque link arms. McFarlane recommends thoroughly inspecting all nose strut components when replacing a severely worn stop lug.



    Airforms, Inc. | Alcor Instruments and Probes | APS BlackSteel Brake Discs & Linings | Baffle Seal Material | Bearings | Brake and Wheel Components | Brownline Seat/Cargo Tracks | Bushings | Cable, Bulk | Cables and Chains, Flight Control | Cables, Door and Step | Carb Heat Parts | Controls, Push Pull | Curtis Superior Valves | Door and Step Parts | Drain Valves, Fuel and Oil | Electrical Components | Exhaust System | F. Atlee Dodge Products | Flap System Components | Fuel System Components | Gaskets and Seals | Hardware, Standard | Hinges | Knots 2U Products | Landing Gear Components | Metal Bar Stock | Miscellaneous | Oil Coolers | Plastic and Fiberglass Trim and Fairings | PMA Products, Inc. | PROP GUARD Anti-Abrasion Boot | Pulleys | Rudder Pedals | SAF-AIR Fuel and Oil Drain Valves | SAFE-HEET Engine Heaters | Seat Rails and Seat Components | Skins, Control Surface | Steering Rods, Boots, & Doublers | Stene Aviation Products | Texas Aeroplastics Products | Tools | Universal Joints, Control Yoke

    McFarlane Aviation
    ©1997-2017 McFarlane Aviation, Inc. All rights reserved.
    Terms and Conditions of Sale | Terms and Conditions of Use | Privacy Statement | Request a Catalog | Master Product List

    McFarlane Aviation