Product Details
P/N
|
Thread Size
|
NSN
|
Dia. Max
|
Dia. Min
|
Length
|
Grip
|
Thread Length
|
Locking Mech.
|
Material
|
Grade
|
Weight (lb)
|
AN4-17 |
1/4-28 UNF-3A |
N/A |
0.249 |
0.246 |
1.906 |
1.438 |
0.468 |
Drilled Shank |
Alloy Steel* |
4037 or 8740 |
0.030543 |
AN4H17A |
1/4-28 UNF-3A |
N/A |
0.249 |
0.246 |
1.906 |
1.438 |
0.468 |
Drilled Head |
Alloy Steel* |
4037 or 8740 |
0.030663
|
AN4-17A |
1/4-28 UNF-3A |
N/A |
0.249 |
0.246 |
1.906 |
1.438 |
0.468 |
None |
Alloy Steel* |
4037 or 8740 |
0.030863
|
*Cadmium Plated, AMS-QQ-P-416, Type II, Class 2
**Passivation per AMS2700
AN Bolts from Airfasco
- In stock, ready to ship!
- Save $$$
For all AN3 through AN20 options, see below table and key for hardware that McFarlane carries. Use the key for help with selection of part numbers.
Partial P/N |
Wrench Size |
AN3 |
3/8" |
AN4 |
7/16"
|
AN5 |
1/2" |
AN6 |
9/16" |
Can You Stop Nose Gear Shimmy? by Dave McFarlane
Also available as part of the convenient Torque Link Repair Kits which include all commonly replaced torque link parts.
Supersedures
Eligibility Notice
Please verify that this product is eligible for your aircraft before adding
it to your cart.
Click here
to view product eligibility.
OEM Part Number
|
McFarlane Part Number
|
Comment
|
400-112 |
AN4-17 |
|
Eligible Aircraft
Make |
Series |
Model |
Beginning S/N |
Ending S/N |
Eligibility Chart |
Many |
Many |
Many |
0 |
ZZZZZZZZZZZZZZZ |
7840
|
Many |
Many |
Many |
0 |
ZZZZZZZZZZZZZZZ |
|
Related Documents
Press Releases
Maintenance and Product Guides
Eligibility Charts
Related Product Catalog Pages
Frequently Asked Questions
Question |
How do you remove torque link bushings to install new ones?
Removing the flanged bushings from the torque link forging can be difficult as there is not a good surface to press against or grab onto. An easy way to remove them is to thread them with a tap, screw a bolt in the thread you made, and then drive or press against the bolt. The thread does not have to be a full depth thread for the bolt to hold securely in the bushing. The bushing material is somewhat hard, but not so hard that a standard hardware store tap will not do the job. Use cutting oil on the tap to prevent tap damage. Normally the bushing will then come out easily.
For stubborn bushings, soak the link assembly in boiling water before pressing the bushing. The heat will expand the aluminum forging more than the steel bushing. This helps loosen the press fit while limiting the temperature to prevent from overheating and harming the heat treat of the aluminum forging. A controlled oven can be substituted for boiling water as a heat source, but do not exceed 350° F. Do not use flame or other non-controlled heat sources.
An alternate method is to put dry ice in the bushing before driving or pressing on the bolt you threaded into the bushing. Do not over-press or hammer as the aluminum can gall to the bushing and leave a damaged bushing bore. If the bushing does not come out with light to moderate force take the time to use some heat or cold to help.
|
I installed a torque link kit and serviced my shimmy dampener; why do I still have a shimmy problem?
There are many components all connected to keep the nose gear in line. If one component is worn or out of tolerance it can cause shimmy problem. Reference Dave McFarlane’s article: Can You Stop Nose Gear Shimmy instructions and suggestions.
Overlooked items also include the rod ends, shimmy dampener mounting and attachment, shimmy dampener, and steering collar. The steering collar is where the steering rod tubes connect and the upper torque link is attached to, along with the shimmy dampener on most aircraft. If the steering collar has play vertically and laterally and is allowed to tilt; that will cause excessive wear and force on the torque links, steering, and strut components. There are three different thicknesses of shims to help get the collar in place.
Ensure that the shimmy dampener is working properly with no dead spots in dampening action. The cylinder could be worn on the inside or on a piston that warrants replacement of components. All of the nose strut components are tied to each other and any movement is transmitted through to the tire and back through the dampening system, which if remedied will continue to be more pronounced.
|