McFarlane Aviation Products ORDER ONLINE NOW!
Or Call 1-866-920-2741
M-TH 7:30am-5:30pm CT
F 7:30am-5:00pm CT
Quick Search      Search Tips

    
Your Shopping Cart
You Have 0 Items in Your Cart
Subtotal  $0.00
View Cart Check Out Help
Login Package Tracking Purchase Options
Part Number: APS66-03300
Description: BRAKE LINING
FAA-PMA
PMA Supplement APS1
PMA Supplement APS34
Qty per Aircraft:
Unit of Measure: 10PK
Retail Price: $185.00
Inventory Status: Stock
Your Discount Price: $120.30
Qty 10PK

Please verify eligibility for your aircraft
Product Image

Metallic (adherent) type brake lining

Note for Cessna 208 series aircraft: APS66-03300 (Standard Lining) and APS66-15300 (Extended Life Lining) are both approved for the Cessna 208 series aircraft. Aircraft with 30-182A calipers installed must use APS66-15300 linings. Aircraft with 30-182 calipers installed may use either APS-03300 or APS66-15300 linings in complete sets. NEVER mix APS66-03300 linings on the caliper as the APS66-15300 linings. The APS66-15300 are 0.035" thicker than the APS66-03300.


Please note:
Eligibility depends on the wheel, brake, and aircraft make, model, and serial number. Please see the current catalog information or click "View Eligible Aircraft" and read any applicable comments to verify and/or determine eligibility.

 

APS Brake Linings  
Improve braking performance

             

Metallic and Semi-Metallic Brake Linings
Two types of brake linings are available: semi-metallic/organic (abrasive) and metallic (adherent). The part number of the brake assembly as determined by the OEM dictates which type of lining is to be used.

The semi-metallic linings are made with Kevlar fibers integrated into the material, providing the greatest stopping power and long lining life. The optimal operating temperature of the semi-metallic linings is 600-900 deg F.

The main ingredient in the metallic linings is iron. In an adherent system, a thin layer of lining material transfers and adheres to the disc during break-in. The optimal operating temperature range of the metallic linings is 950-1200 deg F.

Brake discsrivets and pins also sold separately. APS linings can be used with any OEM or PMA discs.

Warning:
One of the most important factors in disc and lining performance and safety margins is proper break-in. In order for any brake system to work optimally, the disc and linings must be properly bedded. Please follow the break-in procedures upon installation.

Lining Break-In Procedures 

Brake bleed valveswheel bearing cups and cones, and wheel grease seals also available.


 

Airforms, Inc. | Alcor Instruments and Probes | APS BlackSteel Brake Discs & Linings | Baffle Seal Material | Bearings | Brake and Wheel Components | Brownline Seat/Cargo Tracks | Bushings | Cable, Bulk | Cables and Chains, Flight Control | Cables, Door and Step | Carb Heat Parts | Controls, Push Pull | Curtis Superior Valves | Door and Step Parts | Drain Valves, Fuel and Oil | Electrical Components | Exhaust System | F. Atlee Dodge Products | Flap System Components | Fuel System Components | Gaskets and Seals | Hardware, Standard | Hinges | Knots 2U Products | Landing Gear Components | Metal Bar Stock | Miscellaneous | Oil Coolers | Plastic and Fiberglass Trim and Fairings | PMA Products, Inc. | PROP GUARD Anti-Abrasion Boot | Pulleys | Rudder Pedals | SAF-AIR Fuel and Oil Drain Valves | SAFE-HEET Engine Heaters | Seat Rails and Seat Components | Skins, Control Surface | Steering Rods, Boots, & Doublers | Stene Aviation Products | Texas Aeroplastics Products | Tools | Universal Joints, Control Yoke

 
McFarlane Aviation
©1997-2017 McFarlane Aviation, Inc. All rights reserved.
Terms and Conditions of Sale | Terms and Conditions of Use | Privacy Statement | Request a Catalog | Master Product List

McFarlane Aviation