McFarlane Aviation Products - 700KT

Part Number: 700KT

SAFE-HEET/CONTROLLER KIT
Qty

Product Details

For aircraft engine models:

Teledyne Continental:
C-125, C-145, O300, GO-300, E165, E185, E225, IO-360, TIO-360, and LTSIO-360

 

Avco Lycoming:
O-235, O-290, O-320 (except O-320-H), IO-320, AIO-320, LIO-320, AEIO-320, O-360, HO-360, LO-360, IO-360, HIO-360, AIO-360, LIO-360, LHIO-360, AEIO-360, VO-360, IVO-360, TIO-360, TO-360, TIO-360, LTO-360, O-435, GO-435, VO-435, GO-480, GSO-480, and IGSO-480

 

 

SAFE-HEET

Silicone Pad Aircraft Engine Heater
Preheat in cold weather for longer engine life. 

Heats the entire engine! 

 

Easy to Use

  • Permanent installation - thin, flexible pad bonds to engine oil sump
  • FAA-PMA for Continental, Lycoming and Franklin engines
  • No STC or Form 337 required (log book entry only)
  • No engine or airframe modifications required
  • Includes instructions and all necessary materials
  • Can be used alone or with a timer or temperature controller
  • 110V AC
  • Industry-leading 4-Year Warranty

 

Economical and Efficient

  • Puts the heat where it is needed
  • Heats the air inside the engine
  • Uses about 300 Watts (less than the price of a cup of coffee a day!)
  • Warms the engine oil from subzero to safe starting temperature in less than one hour
  • Thermally conductive adhesive for efficient heat transfer and lower surface temperatures
  • Bonded heatsink distributes heat evenly
  • Reduces costly starter and engine abuse during cold weather starts

 

Safe

  • UL recognized components. 100% thermal fused element
  • External ground wire grounds the engine and airframe to the electrical outlet, reducing the risk of electrical shock in damp outdoor locations
  • Thermostatically controlled to maintain oil sump temp less than 160 degrees F
  • No flame or hot air to burn cowling or plastic parts
  • Reduces the risk of fires associated with cold starts
  • Ground Fault Circuit Interrupter (GFCI) included to reduce the risk of electrical shock and power surge damage 

 

P/N Dimensions Watts
700 4 inch x 4 inch 200 Watts
705 7.5 inch x 3.5 inch (diamond)  150 Watts
720 7 inch x 4 inch 300 Watts

 

Installation Tip:
SAFE-HEET engine heaters are installed with a two-part adhesive. The engine heater can be installed quickly and easily by using the 707 temperature controller at half power. At temperatures below 70 degrees F the temperature controller must be used to ensure proper adhesive cure. Proper adhesive cure is essential to service life of the heater.

Cautions:

  • Do not plug engine heater in before installation. Heater will be damaged.
  • Do not use without the 709 Ground Fault Circuit Interrupter.
  • Do not neglect your heater. Periodically inspect for proper grounding, security and cord condition.

 

 

Terms of Limited Warranty
All SAFE-HEET Engine Heaters are warranted for four years from date of sale to the original consumer against defects in workmanship and materials. The manufacturer's only obligation shall be to repair or replace at the manufacturer's option the product provided it is returned transportation prepaid to the factory within four years from date of sale to original consumer. Defects or failures due to incorrect installation, improper voltage, improper usage or handling, or any other condition beyond our control, as to any and all of which the manufacturer will be sole judge, are specifically excluded from this warranty. This warranty gives you specific legal rights. You may have implied warranty rights which vary from state to state. No other liability of any kind, arising from the use of the product, whether defective or not, is assumed.

 

AeroShell Oil and Tempest Oil Filters also available. 

Kit Components

Part Number 700KT contains the following:

Component Description Quantity U/M
700 SAFE-HEET ENGINE HEATER KIT 1.000 EACH
707 SAFE-HEET Temp. Controller 1.000 EACH

Eligible Aircraft

Make Series Model Beginning S/N Ending S/N Eligibility Chart
Many Many Many 1 999999999999999 SH101

Frequently Asked Questions

Question
Why should I buy the McFarlane brand?
What does the GFCI do?
I don’t think enough adhesive was supplied with my SAFE-HEET. Can you send me more or can I use the silicone adhesive?
Why should I purchase a complete kit?
How long should I let the adhesive cure?
Should I leave the heater plugged in all the time?
What does it cost to operate the SAFE-HEET?
Is there a SAFE-HEET designed to be used with 240 volts?
Can two SAFE-HEET engine heaters be connected to one temperature controller?
What are the watts of SAFE-HEET?
My GFCI is not working.
Can I install SAFE-HEET on an induction box/Plenum?
Can I use temperature controller P/N 707 with a 220 Volt system?
What setting do I place the 707 controller to get my engine at a certain temperature?
Do you have any advice for installing a SAFE-HEET?
warningWARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov