McFarlane Aviation Products

Part Number: MC0710618-6

SEAT RAIL (Inboard RH)

Eligibility Notice

Please verify that this product is eligible for your aircraft before adding it to your cart.

Click here to view product eligibility.

Approval	FAA-PMA
Condition	New
Manufacturer	McFarlane Aviation, Inc.
Qty Per A/C	1
Unit of Measure	Each
Retail Price	$688.67
Your Price	$601.51
Stock Status	In Stock

Share This Page

images/includeimages-mc0710618-6-side.jpg

Product Details

This seat rail has seat adjust holes.

Seat Rails for Cessna Aircraft

Carefully engineered with many improvements
Added strength and longer life
Anodized for corrosion and wear resistance
Easier installation
Full interchangeability with the original Cessna parts

No Pre-Drilled Rivet Holes for Precise Installation
McFarlane seat rails do not have pre-drilled rivet holes in the rail base allowing the installer to exactly match the aircraft floor rivet pattern. McFarlane discovered while installing and developing our replacement seat rails that the seat rail attachment hole pattern was not consistent from aircraft to aircraft. Even small inconsistencies in the hole locations in the aircraft floor make installation of new seat rails very difficult. For this reason, McFarlane does not pre-drill rivet holes at the factory. (Existing stock may have a few pilot attachment holes drilled at the factory.) This allows the installer to precisely locate the attachment holes to match the holes in the aircraft floor. All special sized or machined attachment holes are machined to finish dimensions. It is necessary to replace all fasteners when the seat rails are installed.

More Material in the Right Places
After studying countless worn and failed seat rails McFarlane's rails were designed with 15% more metal in critical areas. The result is more crack resistance, durability, strength and longer life.

McFarlane Seat Rail

Cessna Seat Rail

For easier installation of seat rails, we also offer Seat Rail Templates, Rivet Kits, Screw Kits and Spotface kits. For guidance on the replacement of fasteners, see FAA Special Airworthiness Information Bulletin CE-90-03R2.

FAA Airworthiness Directive 2011-10-09 requires regular inspection of Cessna seat rails and related parts. For convenient tools to facilitate inspections per this AD, please see the GAUGE SR1 seat rail wear gauge and TOOL110 seat roller housing gauge.

Articulating Seats - Grandpa's Rocker or The Ins and Outs of Articulating Seats by Dennis Wolter
*Reprinted with the permission of the Cessna Pilots Association, April 2012 Issue.

Installation Tip:
The aircraft floor is subject to corrosion from moisture under seat rails. Be sure to remove and treat any corrosion before installing the new seat rails.

Supersedures

Eligibility Notice

Please verify that this product is eligible for your aircraft before adding it to your cart.

Click here to view product eligibility.

OEM Part Number	McFarlane Part Number	Comment
0710618-6	MC0710618-6
0710618-6S	MC0710618-6

Related Categories

Seat Rails and Seat Components >> Cessna Seat Rails

Eligible Aircraft

Make	Series	Model	Beginning S/N	Ending S/N	Eligibility Chart
Cessna	182	182E	18253599	18254423	1SR053
Cessna	182	182F	18254424	18255058	1SR053
Cessna	182	182G	18255059	18255844	1SR053
Cessna	182	182H	18255845	18256684	1SR053
Cessna	182	182J	18256685	18257625	1SR053
Cessna	182	182K	18257626	18258505	1SR053
Cessna	182	182L	18258506	18259305	1SR053
Cessna	182	182M	18259306	18260055	1SR053
Cessna	182	182N	18260056	18260445	1SR053
Cessna	182	A182J	A1820001	A1820056	1SR053
Cessna	182	A182K	A1820057	A1820096	1SR053
Cessna	182	A182L	A1820097	A1820116	1SR053
Cessna	182	A182N	A1820117	A1820148	1SR053

Related Product Catalog Pages

Seat Rails and Extrusions Catalog

Frequently Asked Questions

Question
Can I replace rivets with screws when replacing my seat rails? Yes, but there are some restrictions. The screws must be structural screw with a minimum tensile strength of 50ksi. See SAIB CE-90-03R2 for more details.
Can use blind rivets (e.g., CherryMAX or CherryLOCK) when replacing my seat rails? We do not recommend using blind rivets for seat rail installation.
What is the standard hole depth for drilling additional holes in seat rails? Determine which extrusion is used: STE101 and STE102 - Standard hole depth drilled on the roller flange is .330” and standard diameter is .277”. STE103 and STE104 - Standard hole depth drilled on the roller flange is .280” and standard diameter is .277”.