Backcountry Tough

Proudly supporting the 2021 Husky National STOL competitions

Encouraging, developing, improving, and showcasing pilot flying skills

McFarlane will be awarding a total purse of $2000 cash at each National STOL event!

Tail Cone Angle Kit

Repair your cracked hockey stick!

Addresses AD2020-21-22 and SEL-55-01 

P/N TAIL CONE ANGLE KIT

Thank you for your patience while we clarified the effects of AD2020-21-22. Though the STC for the Tail Cone Angle Kit (STC SA02522AK) allowed for an extended inspection time of 10yr/1500hr, the FAA helped clarify that AD2020-21-22 takes precedence with its required inspection of 5yr/500hr. 

We strive to insure we are providing our customers with the best possible solutions and the most accurate information to support. The QMI: TAIL CONE ANGLE KIT provides significant savings in both purchase price and installation time, while also providing a stronger, longer lasting design than what Cessna offers. With these advantages, McFarlane is proud to work with QMI in the distribution of this kit. 

McFarlane Partners with QMI

STC approved for Cessna aircraft

• Save thousands of $$$ on parts and labor
• Short installation time
• Machined with stronger 7075 aluminum
• Kit includes everything needed for installation on both sides

For ordering information, go to TAIL CONE ANGLE KIT.

Cessna Trim Wheel Kit 

Newly designed sprocket is already fastened to the trim wheel, taking the load off the shaft and roll pins!

Hardware and roll pins included.

McFarlane Partners with QMI

• STC approved for Cessna 180, early 182, and 185
• Hard anodized aluminum for durability
• Eliminate roll pin shear
• Shorter shaft length available soon for pre-1961 aircraft 
  
  

For ordering information, go to CESSNA TRIM WHEEL KIT.

• Cowling Plug Sets
• Ice Inspection Handles
• Cargo Door Escutcheons
• Bleed Air Testers
• Rudder Lock Assembly Kits
• Brake Disc Spacers
• Deice Cyclers
• Extended Baggage Kits
• Floatplane Steps and Handles
• Cargo Pod Locks
• Prop Restraints
• Cargo Door Trim Kits
• Tire Scraper
• Main Gear Gravel Deflectors
• Tail Stand 
• Rudder Gust Lock

         - Caravan 208 and 208B P/N AT- 4111-1

         - Daher Kodiak 100 P/N QK-4111-1

• Nose Gear Gravel Deflectors
• Exhaust Deflectors
• Pitot Cover
• Main Gear Fairing Ribs

         - Upper: GF8-101 Lower: GF8-102

• Seat Stop 
• Fuel Samplers

Tail Slide Kits

P/N TAIL SLIDE 172 KIT

P/N TAIL SLIDE 182-210 KIT

STC approved for Cessna aircraft

Protect your aft bulkheads in the case of an accidental tail strike!

Perfect for flight training and rough fields

• Made from high-strength aluminum
• Epoxy-primed and ready for paint!
• Slides and gently lifts the tail
• Attaches to two bulkheads for extra strength
• Tail Slide Abrasion Guard available separately*

Tail Slide Abrasion Guard

P/N TAIL SLIDE ABRASION GUARD

Guards the Tail Slide section most affected by damage

• Abrasion-resistant steel
• Ideal for flight training purposes
• "TIE DOWN HERE" Stencils included 
• *Not included in the Tail Slide Kits

High performance, vibration free composite propellers for most aircraft

• Scimitar airfoil improves thrust, take-off, climb and cruise! 
• Turbine smooth - Vibration-free operation for improved life
• Field repairable and back country tough
• One-piece machined and rebuildable aluminum hubs
• Flying with floats? Check out the Reversing prop - Only MT has it!

For ordering information, go to MT-Propellers.

Parts for Bush Aircraft  

Complete stock in the lower 48 for fast, economical delivery!!

McFarlane stocks the complete F. Atlee Dodge FAA-PMA product line!

F. Atlee Dodge Aircraft Services is well known for high quality STC modifications and FAA-PMA products

for Piper Super Cubs and Cessna aircraft. Their innovative designs are the result of over 50 years of experience

keeping planes flying and productive in the rugged Alaskan wilderness.

• Make your airplane more rugged (Alaskan Bush Tough!)
  • Heavy duty landing gear components
  • Improved, reinforced airframe parts
  • Heavy duty mufflers
• Improve safety
  • Landing gear safety cables
  • Shoulder harness brackets
• Improve horsepower
  • PA18 Hot-Rod muffler 
• Increase utility
  • Folding seats
  • Float fittings
  • Rear seat heater
  • Steps
• Decrease weight
  • Battery mods

For ordering information, go to Parts for Bush Aircraft. 

SAFE-HEET ™ Silicone Pad Aircraft Engine Heater
Stop costly engine abuse from cold weather today!

Easy to use, economical and efficient, and SAFE

For ordering information, go to SAFE-HEET™.

Cowl Saver ™ Baffle Seal Material

with Bi-Flex ™ Technology

You will feel the difference!

• 36-month money back guarantee and free shipping
• 30x less friction than any other baffle seal on earth!
  

Baffle seal friction causes airframe vibration and destroys cowls

Typical silicone rubber baffle seals have a coefficient of friction among the highest of any known material.

This friction transfers engine vibration into your cowl and firewall causing fastener fretting, fatigue, cracking, chafing and airframe vibration.

For ordering information, go to Cowl Saver™.

• Aircraft Window Cleaner - Fast and easy!

• Pulley Oil - New name, improved oiler, same great oil!

• Exhaust Anti-seize Lubricant - The only anti-seize that works! 

For ordering information, go to D A M™ Hangar and Toolbox Essentials. 

Tempest Product Line

We will continue providing high-quality FAA-PMA parts and services for your instrument panel and firewall forward by expanding

our product selection to include Tempest, Alcor, Marvel Schebler, Precision Airmotive, and Consolidated Fuel Systems.

• Pneumatic, Ignition, and Filtration Products
• New, Rebuilt, and Overhauled Carburetors
• Instruments, Probes, and Sensors
• Fuel Injection Systems 
• FAA Repair Station 

For ordering information, go to Tempest Product Line.

Airforms Complete Engine Baffle Kits
Keep your engine cool with new baffle kits!

Airforms is the premier manufacturer of FAA-PMA replacement baffle kits

• 6061-T6 aluminum with black high temperature fiberglass reinforced silicone seals pre-installed
  • Orange or blue seals available as special order for an additional $55.00 per kit.
    Extended lead time and extra freight cost may apply.
• Bare aluminum or gray powder coat finish (part number indicates finish type)
• Individually interchangeable with factory baffles

Many Improvements:

• Stainless steel brackets where needed
• Hard rivet construction
• 1/2" back plates to secure seals
• Improved fit

Are most of your baffles in good shape, but you just need to replace a few?
McFarlane stocks many common individual baffles for immediate shipment.

Catalog Information 

For ordering information, go to Airforms Complete Engine Baffle Kits.