Why you should install an MT Composite Propeller

High performance, vibration free composite propellers

• Scimitar airfoil improves thrust, take-off, climb and cruise!
• Smooth, vibration-free operation providing comfort for you and preserving the life of your gyros, motor mounts, radios, heat muffs, and cowlings.
• Nickel-Colbalt leading edge for ZERO water erosion and superior durability
• Field repairable and back country tough
• One-piece machined and rebuildable aluminum hubs for unlimited life
• Flying with floats? Check out the MT Reversing prop - Only MT has it!
• Reduced risk of engine damage resulting from prop strikes
• No RPM range restrictions
• Superior engine cooling with reduced CHT and oil temperatures reducing fuel burn.
• No ADs

• MT Composite Advantage
  
• General Overview of MT Propeller Systems
  
• Technical Overview of MT Propeller Systems

MT Propellers are made with aerospace grade carbon fiber combined with light-weight, highly compressed beech/spruce wood core and has a higher strength than aerospace aluminum with no corrosion and fatigue limit.

The MT-blade has no spar for the load carrying core. By this, FOD on leading edge or trailing edge as well as the blade mid area can not create a structural damage requiring the replacement of a blade. Due to the unbeaten vibration behavior no ground rpm limitation and in flight rpm limitation must be established for certified MT-Propeller installations using the natural composite design.

Superior safety, control, performance, maneuverability, and comfort for your aircraft.
You will experience smooth and improved maneuverability and performance during take-off, climb, cruise, and landing. The vibration-free operation generates less fatigue for the crew and airframe, improving comfort for you and the life of your gyros, motor mounts, radios, heat muffs, and cowlings. Additionally, the improved efficiency of MT Propellers leads to lower operating costs! Nickel-Cobalt Leading Edges and enhanced Carbon Fiber Jacket results in ZERO water erosion and superior durability and protection from impacts.

MT Propellers have FOD repairable blades, higher ground clearance, life-unlimited parts, and no active ADs - a safety record unmatched by any other propeller manufacturer. They also produce cooler ITTs during engine start up producing less engine wear, reduced risk of hot starts, lower engine temperatures and no RPM restriction for the complete operation range.

Metal props have absolute dimension limits. Every time a nick is filed out and the prop is dressed, you get closer to that limit. At some point it will exceed the use tolerances and must be scrapped. In addition, each time a metal prop is dressed, you will change the optimized performance dimensions established by the manufacturer. MT Propellers, when overhauled, are brought back to exact factory new dimensions!

Prop Strike!?
Lab tests and field experience has shown less damage with MT Composite props. Usually, the tips were sheared off (rebuild-able) and the engine was not subjected to sudden stoppage. This will save you (and your insurance company ) time and money. Blades are easily repairable and your engine is undamaged. If blade is damaged beyond repair, dont worry! We have most replacement blades in stock ready to ship today! To find the right MT Prop for your aircraft, call our Propeller Specialists at 866-717-1117 or visit Flight-Resource to learn more. Fly Green - Fly MT! MT propellers improved efficiency, significant noise reduction, and renewable resources result in lowest possible environmental impact.

The #1 Propeller for Your Go-Anywhere Adventure

/ 10

/ 10

/ 10

/ 10

/ 10

/ 10

/ 10

/ 10

❮ ❯

Jim Reed - G58 Baron" />

Tom Piscoya - Cessna 170B w/ O-360 "/>

 

“The MT wood core composite prop is the only composite prop that actually absorbs vibration instead of generating vibration like a metal prop or other foam core composites. The smoothness extends the life of everything under the cowl. The braking action of the MT prop gives unmatched control on short field approaches and I get amazing takeoff performance. I had to do a field repair after picking up something that would have ruined a metal blade. It was a quick and easy fix. The 19 lbs. less weight and related gyroscopic loading makes the aircraft more responsive with less stress on everything.”

Dave McFarlane,
Founder of McFarlane Aviation (C175)

Flight-Resource (www.flight-resource.com) merged with McFarlane Aviation Products, thus becoming the world’s largest MT Composite Propeller distributor. Flight-Resource is a sales and engineering company specializing in the development of FAA Supplemental Type Certificates (STC’s) and performance improvements using the vibration free MT-Propeller designs.

For ordering information, call our Propeller Specialists at 866-717-1117.

 

Note: Many different configurations of these props and spinners are in stock. Please call for details and pricing.