P/N: 8001689
OIL COOLER, 8 Row Dual Pass 6"
Please verify that this product is eligible for your aircraft before adding it to your cart.
Click here to view product eligibilityShare this product:
| Approval | FAA PMA |
| Condition | New |
| Manufacturer | AERO-Classics |
| Unit of Measure | Each |
| Retail Price | $1,458.70 |
| Your Price | $1,166.96 Free Shipping on Orders over $500 |
| Stock Status | In Stock |
| Approval | FAA PMA |
| Condition | New |
| Manufacturer | AERO-Classics |
| Unit of Measure | Each |
| Retail Price | $1,458.70 |
| Your Price | $1,166.96 Free Shipping on Orders over $500 |
| Stock Status | In Stock |
Please verify that this product is eligible for your aircraft before adding it to your cart.
Click here to view product eligibilityShare this product:
Eligible Aircraft
| Make | Series | Model | Start S/N | End S/N | Eligibility Chart |
|---|---|---|---|---|---|
| Mooney | M20 | M20E | 101 | 469 | 6628 |
| Mooney | M20 | M20E | 21-0001 | 21-1180 | 6628 |
| Mooney | M20 | M20E | 470 | 1308 | 6628 |
| Mooney | M20 | M20E | 690001 | 690073 | 6628 |
| Mooney | M20 | M20E | 700001 | 700061 | 6628 |
| Mooney | M20 | M20F | 22-0001 | 22-1439 | 6628 |
| Mooney | M20 | M20F | 660002 | 660004 | 6628 |
| Mooney | M20 | M20F | 670001 | 670539 | 6628 |
| Mooney | M20 | M20F | 680001 | 680206 | 6628 |
| Mooney | M20 | M20F | 690001 | 690092 | 6628 |
| Mooney | M20 | M20F | 700001 | 700072 | 6628 |
| Mooney | M20 | M20J | 24-0002 | 24-3431 | 6628 |
Product Details
Direct Replacements for Stewart Warner (Meggitt) Oil Coolers
AERO-Classics HE Series High Efficiency Oil Coolers
Don't be fooled by Stewart Warner oil coolers available from many aviation suppliers. Even though it's the same part number and manufacturer, if it did not come from the aircraft manufacturer or say FAA-PMA, then it is not FAA approved.
- FAA-PMA direct replacement
- Match or outperform the original
- Save $$$
Manufacturer Installation Tips:
Mounting Flanges
Be sure to mount the cooler using all four mounting flanges. This will evenly distribute stress that can cause cracking.
Threads and Hoses
- On pipe (tapered) threads, Anti-seize lubricant should always be used to prevent thread galling. Steel fittings are an additional added measure that can prevent thread galling.
- Avoid damage to the oil cooler during operation. Hoses connecting to the oil cooler should be installed, supported, and tied down in a manner that will avoid vibration and pulling stresses being induced onto the oil cooler. Hoses must be fastened to the same structure that the cooler is attached to. If the cooler is mounted to the airframe structure, the hoses must be supported by the airframe structure. If the cooler is attached to the engine structure, the hoses must be supported by the engine structure. Do not allow engine movement stresses to be induced into the cooler through the hoses.
- A back-up wrench should always be used when installing fittings into any oil cooler to prevent damage to the oil cooler.
- Please note (if applicable) the threads on this part have been inspected by the manufacturer before shipment and found to be in conformity. Galling of threads is not considered a warrantable claim.
Why choose McFarlane?
OUR PARTS ARE ENGINEERED TO LAST LONGER WHILE SOLVING KNOWN SAFETY ISSUES
OVER 40,000 PARTS IN STOCK WITH SAME DAY SHIPPING IF ORDERED BY 3PM
OUR TEAM PROVIDES THE OLD-FASHIONED CUSTOMER SERVICE THAT YOU EXPECT
Don't see what you're looking for?
View our search tips page, support page or please contact us.
Or, try our chat feature, located on the right side of our website during business hours. We welcome your comments and suggestions.
