McFarlane Aviation Products

Home / Shop Parts / All Products / Instruments, Probes and Leads / Leads / EGT/TIT Leads / 98156

WIRE, Bulk Type K Thermocouple Extension

P/N: 98156

Share this product:

Approval	EASA STC (European Union), FAA PMA STC
Condition	New
Manufacturer	Alcor, Inc.
Unit of Measure	Inch
Retail Price	$0.65
Your Price	$0.53
Stock Status	Out of Stock

Approval	EASA STC (European Union), FAA PMA STC
Condition	New
Manufacturer	Alcor, Inc.
Unit of Measure	Inch
Retail Price	$0.65
Your Price	$0.53
Stock Status	Out of Stock

Share this product:

Eligible Aircraft

Supersedures

Documents

Supersedures

Please verify that this product is eligible for your aircraft before adding it to your cart.

Eligible Aircraft

Make	Series	Model	Start S/N	End S/N	Eligibility Chart
Many	Many	Many	0	ZZZZZZZZZZZZZZZ	6630

Related Categories

Product Details

Alcor Leads

High quality stranded material for flexibility and long life
(cheapy single stranded leads are prone to break)
Used to attach a thermocouple probe to a gauge
Must be of the same type as the thermocouple
(e.g. A type K probe must use type K leads)

CHT Leads:

Integrated resistor ensures the same resistance regardless of length
Choose leads based on the distance from the probe to the gauge

CHT Type J Black and Yellow
P/N	Resistance	Length
42535	7.76 +/- .20 Ohms	90"
42536	7.76 +/- .20 Ohms	144"
42543	7.76 +/- .20 Ohms	216"
42537	7.76 +/- .20 Ohms	240"

EGT/TIT Leads:

Each length has a different resistance
Total resistance of the lead and the probe must match the calibration of the gauge
Choose replacement leads based on the calibration of the existing gauge
For a new system, choose leads based on the distance from the probe to the gauge and choose a gauge with the corresponding calibration.

EGT Type K Red and Yellow
P/N	Resistance	Length
42525	4.34 +/- .08 Ohms	90"
42526	2.71 +/- .06 Ohms	144"
42528	6.52 +/- .11 Ohms	216"
42527	7.25 +/- .12 Ohms	240"

Calibration note:
EGT gauges with relative lean to peak markings may be easily recalibrated in flight per the instructions provided with the gauge. TIT, CHT and EGT gauges with True Temperature markings must either be recalibrated with an Alcal System Tester or returned to Alcor for recalibration if the total lead and probe resistance does not match the gauge calibration.

Digital or amplified gauges from other manufacturers are not sensitive to lead resistance, therefore leads may be shortened as needed for these applications without requiring recalibration.

WARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov