Part Number MC0411091-2

CONTROL (Throttle)

P/N: MC0411091-2

Jump to product details

Approval FAA PMA
Condition New
Manufacturer McFarlane Aviation
Unit of Measure Each
Retail Price $562.03
Your Price $525.26 Free Shipping on Orders over $500
Stock Status In Stock

Please verify that this product is eligible for your aircraft before adding it to your cart.

Click here to view product eligibility

Share this product:

Supersedures

Please verify that this product is eligible for your aircraft before adding it to your cart.

Related Documents

Frequently Asked Questions

Eligible Aircraft

Make Series Model Start S/N End S/N Quantity Per Aircraft Location Eligibility Chart
Cessna 170 170 18000 18729 1 Throttle 1197
Cessna 170 170A 18730 20266 1 Throttle 1197
Cessna 170 170B 20267 25372 1 Throttle 1197

Eligibility Chart 1197 Notes:

  1. Controls not eligible for A188A or A188B with O-470 engine.

Related Categories

Product Details

Note: For Cessna 170 S/N 18000 thru 18729, 170A S/N 18730 thru 20266, and 170B S/N 20267 thru 25372, the provided wedge washers (McFarlane P/N EC89) must be used to angle the control and avoid interference behind the instrument panel.

Potential Alternate:

FAA-PMA Approved Buttonless Vernier-Assist now available for your throttle!

Not only do we offer an extended line of FAA-PMA approved controls, our breakthrough Vernier-Assist design is now approved on throttle controls for Cessna, Piper, Beechcraft, Grumman, and Bellanca. You asked for it and now we have it!

Fine adjustments are made by rotating the knob clockwise or counterclockwise and coarse adjustments by pushing and pulling without the hassle of a release button. The McFarlane Vernier-Assist™ Throttle Controls use a patented roller action.

  • Jam-proof safety
  • Precision power adjustments
  • Smooth friction control
  • Light and compact
  • Standard vernier action, without the button!

Part Numbering Note:

Part numbers for Vernier-Assist™ are the same as McFarlane's original push-pull FAA-PMA approved controls, except the "MC" prefix changes to "MCVA". 

Examples:

Standard Push-Pull P/N MC9863056-2 or Vernier-Assist™ P/N MCVA9863056-2

Standard Push-Pull P/N MCS1222-1S or Vernier-Assist™ P/N MCVAS1222-1S

Standard Push-Pull P/N MCC299505-0101 or Vernier-Assist™ P/N MCVAC299505-0101

Please verify product details for suitability for your application.

McFarlane Push-Pull Controls

McFarlane offers FAA-PMA approved throttle, propeller, mixture, cowl flap, carb heat, and cabin environment controls for many single engine Cessna, Piper, Grumman and Bellanca aircraft. We also have a wide variety of controls for use on non-certified aircraft.

Please view the Eligibility Chart or click "View Eligible Aircraft" above to determine the correct part number for your specific aircraft.

See the Customer Testimonials page for what others say about McFarlane controls.

All Controls - Group (all-controls--web.jpg)


Our engine and propeller controls incorporate a number of unique features that make McFarlane Controls the highest quality engine and propeller controls on the market:

Metal Construction
Unlike the controls of our competitors that use plastic, McFarlane control fittings and components are made from stainless steel, plated steel, anodized aluminum, and brass. Our Vernier control locking devices are precision formed and heat treated in critical wear areas.

A Superior Conduit System
Our controls have low-friction smoothness and flexibility, even when routed with multiple tight bends. This superior conduit allows for a tighter bend radius without interfering with the controls function, we recommend a 3” minimum bend radius during control routing. Our conduits are made from carbon steel wire, specially formed for increased strength and smooth inside diameter. Two of these wires are coiled in tandem for increased tensile strength. A Teflon jacket extruded over the coiled housing provides additional strength and wear-resistance. A virgin Teflon® liner in the center of the conduit reduces friction and ensures reliable operation.

Knobs Make a Difference
Our “pilot friendly” knobs are all compression molded from a reinforced aluminum or phenolic. Unlike the soft injection molded knobs of our competitors, our knobs are hard and thermally stable. They're powder coated, scratch-resistant, and do not deteriorate. McFarlane knobs meet the latest F.A.R. requirements for shape and color.

Vibration Dampening Features
Our metal swivel joints have a unique Viton® rubber vibration dampening sleeve with a spring load system that dampens engine induced vibration in the push rod guide tube and metal swivel joint. Molded Viton® boots are also used on the push rod guides to seal out contaminates. The Viton® rubber withstands the high temperature of the engine environment while resisting degradation from oil and solvents. This system drastically reduces the wear that leads to premature control failure.

Special Lubrication
McFarlane controls have a special lifetime lubrication applied to critical sliding surfaces, made from a molybdenum disulfide and Teflon® based lubricant with a synthetic grease base. Our lubricant will reduce friction and prevent galling and contamination locking of the control components from -70 deg F to over 1000 deg F.

Consistent Quality
The assembly of McFarlane engine controls is interrupted many times for inspections of all critical elements to ensure only the highest quality controls are produced. Each inner wire swage, each push rod, each conduit fitting and terminal is inspected by our assembly team. As a further measure of quality, a second inspector also checks each critical detail to make sure only controls of the highest quality pass inspection. Attention is given to every detail at McFarlane Aviation. For instance, we verify the torque required to operate every vernier control to ensure it operates properly and has that smooth feel our customers have come to expect.

Tough in any Environment
The McFarlane controls have an outstanding performance and reliability record in all environments; we test them in the harshest environments to ensure they will provide a long and reliable service life. Bush pilots prefer our controls because they work freely at 50 deg below zero and have proven solidarity in harsh salt-water. Temperatures approaching the melting point of the steel components cannot stop McFarlane controls from functioning.

Time Tested
With over 25 years of experience building aircraft engine controls and with thousands of units in airplanes flying on every continent (yes, even Antarctica), McFarlane controls are universally recognized for their high quality products and proven track record.

Recommended Service Life
Considering the operating environment and criticalness of engine controls, our maximum recommended in-service time for McFarlane engine controls is equal to the maximum time between engine overhauls, as recommended by the engine manufacturer.

Vernier-Assist™
McFarlane’s patented Vernier-Assist™ offers the pilot precision control of the engine, unlike anything else on the market! The Vernier-Assist assembly operates on friction alone by simply turning the knob, with no threads or locking balls/pins. It also allows for normal coarse movement by pushing in or out on the knob. – Unlike standard threaded vernier controls, this design cannot be jammed. The friction control provides smoothness and precision when operating the throttle and a friction lock secures the control in position, but it can be easily overridden in the case of an emergency. It is now FAA-PMA approved and SAFE!

Custom Engine Controls
Custom engine controls can be manufactured for aircraft not listed in the approved application charts. All McFarlane custom control cables are built to customer provided specifications. McFarlane custom engine controls duplicate the original customer supplied controls in regards to length, thread size and pitch, wear sleeve locations, and travel length. McFarlane custom controls are manufactured to the same standards using the same materials, rigorous testing and inspections as our FAA-PMA products. Custom controls are not FAA-PMA approved. For ordering details, go to the Custom Engine Control Page.

US Patent No. 8,485,057 B1

WARNING: Cancer and/or Reproductive Harm - www.P65warnings.ca.gov

Why choose McFarlane?

OUR PARTS ARE ENGINEERED TO LAST LONGER WHILE SOLVING KNOWN SAFETY ISSUES

OVER 40,000 PARTS IN STOCK WITH SAME DAY SHIPPING IF ORDERED BY 3PM

OUR TEAM PROVIDES THE OLD-FASHIONED CUSTOMER SERVICE THAT YOU EXPECT

Map of the US with a star in Eastern Kansas

Center of the US for Fast Shipping

Don't see what you're looking for?

View our search tips page, support page or please contact us.

Or, try our chat feature, located on the right side of our website during business hours. We welcome your comments and suggestions.

Select a Category

McFarlane Aviation Family
McFarlane Catalog
Contact Us

Contact us with anything. If we don't have it, we'll help you solve your challenge