EarthX Accessories and Components

This Optimate Plug in the Wall Lithium charger will quickly charge your battery at 6amps, maintain it at the optimal voltage.

Includes:

1x TM-391

1x battery alligator clip

1x waterproof quick connect lead with ringlets and SAE connector

Special Features:

• Ultimate LiFePO4 professional level battery charger. High efficiency diagnostic charger and tester for LiFePO4 / LFP batteries.
• Perfect for charging and seasonal maintenance of a 13.2V LiFePO4 / LFP battery sized from 2 to 100 Amp-hour.
• SAVE : Low Volt Start of 0.5V + 3-step low volt SAVE and TEST; CHARGING AMPS: 6A (AmpMatic).
• USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C); STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector; Weatherproof battery lead & standard battery clip set included.
• With 5 Amps of charge current available OptiMate lithium unique multi step ampmaticTM program recharges and balances cells within the battery quickly and efficiently.
• OptiMate lithium’s maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge.
• IDEAL FOR: Lithium (LiFePO4) 12.8/13.2V batteries from 3 – 72Ah
• CHARGING AMPS: 6A (Ampmatic current)
• CHARGING VOLTS: nominal: 12.8V range: 0.5V – 14.4V
• OPERATION:  Fully automatic
• FEATURES: Starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented.
• INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).
• SAVE : Low Volt Start of 0.5V + 3 step low volt save & test.
• SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

Technical Specs:

• Recommended for LiFePO4 batteries: up to 100Ah
• Programme control: ampmatic microprocessor
• Input current max: 0.55A at 230V
• Reverse drain current: less than 0.001A
• Output current (bulk charge): 0.4A – 6.0A
• Charge time limit: 24 hours (maintenance time: unlimited)
• Maintain/test cycles: 30 min/30 min (alternating hourly)
• Charge retention test: Range: 10.1 – 13.3. GOOD (green) = battery voltage > 13.3V
• Enclosure classification: IP54
• Mounting: east direct wall mounting
• Input & output cable lengths: 2m
• Lowest temperature range: -40°C – +40°C (safe for indoors and outdoors)
• Warranty: 3 years limited warranty through OptiMate