Cabin Environment Controls
FAQs for "Cabin Environment Controls"
Frequently Asked Questions
How do I clean and sanitize a McFarlane Push-Pull Control?
We make the following cleaning and sanitizing recommendations to be completed between flights:
Recommended Cleaning Process
1. Put on clean disposable gloves prior to cleaning and disinfection.
2. Pull controls back to the fully retracted position to expose the full length of the control shafts.
3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft.
!!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!!
4. Gently and thoroughly wipe down every control knob surface and control shaft.
5. Let cleaning solution dry on these surfaces (contact time).
6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface.
7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft.
Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.
How do I trim my engine control to length?
Please reference the Installation Instructions included with your new control.
What is the minimum bend radius for my engine control?
McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
Why is my new engine control too long/short?
There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.
Cabin Environment Controls for Cessna and Piper Aircraft
Longer life and improved design
- Special, heavier wire for more fatigue strength and reliability
- Improved friction mechanism
- Reduced vibration wear
- High temperature Teflon lined conduit
Controls for Cessna Aircraft
McFarlane has FAA-PMA approval on the cabin air, cabin heat, cabin vent, cold air and defrost controls for many single engine Cessna aircraft. All of these controls feature McFarlane's improved push-to-unlock mechanism with greater holding strength and longer life. Most knobs match originally equipped knobs.
Controls for Piper Aircraft
McFarlane has FAA-PMA approval on the carburetor heat, alternate air, fuel mixture, parking brake, and cabin environment controls for most single engine Piper aircraft. Our anti-rotate feature reduces stress on the inner wire.
Give your panel an upgrade - Replace old discolored knobs!
High quality replacement knobs duplicate the original Piper color and shape to maintain the original factory appearance of the instrument panel. To select the correct knob for your aircraft, please see the Eligibility Chart.
Also see CA70371-002 or U70371-000 for swivel fittings (bug nuts).
McFarlane rod ends, conduit clamps, adel clamps, and wire clamps also available!
Why choose McFarlane?
OUR PARTS ARE ENGINEERED TO LAST LONGER WHILE SOLVING KNOWN SAFETY ISSUES
OVER 40,000 PARTS IN STOCK WITH SAME DAY SHIPPING IF ORDERED BY 3PM
OUR TEAM PROVIDES THE OLD-FASHIONED CUSTOMER SERVICE THAT YOU EXPECT
Select a Category
McFarlane Aviation Family
