Landing Lights
FAQs for "Landing Lights"
Frequently Asked Questions
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers.
The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry.
If there are modifications to the wiring, a 337 should be submitted for approval for the installation.
If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip.
The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
Landing | Taxi | Recognition
Know the Difference... Learn more about AeroLEDs.
FREE SHIPPING on AeroLEDs Lighting!*
AeroLEDs aircraft landing, taxi and recognition lighting products offer numerous advantages over conventional Halogen and Xenon bulb based aircraft lighting technologies. AeroLEDs are 10x more efficient than incandescent lighting, draw far less current than conventional lighting and require no external hi-voltage power supply. AeroLEDs LED lights maintain their full light output even at lower engine RPM. The LEDs in AeroLEDs’ products are solid-state mounted devices that can tolerate high levels of shock and vibration without failing. Most AeroLEDs products have a built-in pulse mode and can synchronize with each other to create an alternating wig-wag flash pattern to enhance in-flight visibility for air-to-air and air-to-ground collision avoidance and recognition. Our aircraft landing, taxi, and recognition lighting products offer unprecedented performance that will truly transform your nighttime flying experience and provide unmatched daytime recognition for added safety.
*Free shipping on orders over $300. Applies to Ground Shipping in the lower 48 states.
Why choose McFarlane?
OUR PARTS ARE ENGINEERED TO LAST LONGER WHILE SOLVING KNOWN SAFETY ISSUES
OVER 40,000 PARTS IN STOCK WITH SAME DAY SHIPPING IF ORDERED BY 3PM
OUR TEAM PROVIDES THE OLD-FASHIONED CUSTOMER SERVICE THAT YOU EXPECT
Select a Category
McFarlane Aviation Family
