Home / Shop Parts / All Products / Miscellaneous / Stabilizer Jack Screw Actuator Kit

Stabilizer Jack Screw Actuator Kit

Documents for "Stabilizer Jack Screw Actuator Kit"

	Title	Article Type
	2011-03-17 Cessna 180/182/185 Stabilizer Jack Screw Actuators
	2018-08-21 Tie-Down Eyebolts, Trim Wheel Shafts, Trim Wheel Sprockets and more
	McFarlane STC Use Authorization

Stabilizer Jack Screw Actuator Kit
Stabilizer jack screw actuator kit part number 1111 is an FAA-PMA/STC approved kit to replace all wear components for the stabilizer actuator assemblies for many Cessna 180, 182 and 185 aircraft.

Improved material for extreme corrosion resistance
McFarlane replaces the original steel components with duplex stainless steel (even better than monel) components for a long life even in a harsh saltwater environment.

Wear and vibration resistance for longer life
No rust, even in salt water
Costs less than the standard parts

Now improved with a Black Max™ nitrocarburized screw assembly to reduce friction and extend service life!

Ultra-precision bearing with no backlash

Improved Bearing
Precision bearing reduces free play and features extra low temperature grease for easy turning at low temperatures.

Improved Strength and Reliability
The original Cessna actuators use a 3/32" roll pin to attach the sprockets and retaining collars to the screw bars. These pins are critical as the front of the stabilizer would detach from the airframe if they failed. Although the original roll pins are technically strong enough, due to the nature of roll pins, they are prone to unpredictable failure. This is especially true if they are bent or damage during installation. To provide a more robust design, McFarlane redesigned the sprocket and retaining collar to allow the use of a 5/32" roll pin. This more than doubles the strength of the design. The screw and barrel are match machined for a precision fit.

Instructions for Continued Airworthiness

Trim Actuator Boot and Clamp

Now FAA-PMA approved and manufactured by McFarlane

Boot P/N MC0712500-18 and Clamp P/N MC7137