Hinges
Cabin Door Hinges for Cessna Aircraft
  |
 |
Improved McFarlane design
- FAA-PMA approved welded design
- Thicker alloy steel
- Heat-treated for extra strength and wear resistance
- Precision pin holes for longer life
- Pre-drilled and epoxy primed
Cabin Door Hinge Pins
Don't trust those old brass pins!
- Fast door removal — makes cabin maintenance easier!
- FAA-PMA approved design 5x stronger with stainless steel
- Easy to inspect
- Secure safety pin design
- Convenient kit available: Kit P/N CDHP-KT-1 contains four hinge pins
|
Bent or Straight Hinges - Only from McFarlane! Ensure the right fit for your Cessna! Cessna legacy airplanes, built prior to 1979, feature a door post skin that angles inward (toward the front edge of the door). Aircraft with this bend require a hinge with a 5° bend for correct installation. Later models and new production aircraft do not have this inward angle and use a straight hinge. McFarlane manufactures both bent and straight hinges. We HIGHLY recommend verifying your door hinges before ordering. When in the field, replicating the 5° bend from a straight hinge is very difficult and rarely correct. Let us take away the worry and provide you with the correct hinges today! Please note that McFarlane does not have exact serial number information as to when the hinges went from bent to straight. |
| Maintenance Tip! The Cessna doors have tremendous leverage on the forward door seals. Door hinge and hinge pins can easily be over stressed and fail if incorrect door seals are installed. Always use approved door seals that are designed for your aircraft. Maintenance Tip for Door Hinge Replacement: To install new hinges, temporarily attach the replacement hinges to the door using temporary fasteners. Install the door and hinge pins. Verify the door alignment with the door opening. The leading edge of the door should be approximately flush with the adjacent door post skin. Minor bends can be made to the upper hinges to perfect the door fit. Please reference the ICA. |
Cabin & Cargo Door Hinges for Cessna Aircraft
Cessna 180, 185, 205, 206, 207, and 210 Series Aircraft
Improved McFarlane design
- FAA-PMA approved with improved machined design
- Better fit and form than competitor's forged hinges
- Available drilled or undrilled
- Save $$$
Quick Removal Clevis Pin and Cotter Key
New and improved design replaces staked-in hinge pin!
Cessna 180, 182, 185, 205, 206, 207, and 210 Series
- FAA-PMA approved design replaced staked-in Cessna hinge pin
- Easy door removal for maintenance
- Corrosion resistant
Coming Soon! Early Cessna Door Hinges - 120, 140, and 150 Series.
Door Hinges for Cessna Caravan
Door hinges have bushings for longer wear!
As the original equipment hinge halves wear and the aircraft door starts to sag, Cessna Service Bulletin CAB96-2 allows a one time repair through the use of an oversize door hinge pin. When the hinge again becomes worn and the door sags, the hinge halves must be replaced and an original size hinge pin re-installed.
- FAA-PMA direct replacements
- Fits all Cessna 208/208B aircraft
- Anodized for corrosion resistance
- Precision fit
- Available with or without bushing
- Replaceable bushings allow extended service life!
 AF2617015-18 |
 AF2617015-19 |
For ordering information go to Caravan Door Hinges.
FAA-PMA Approved Aluminum Aileron Hinge
Cessna 150-210 series aircraft
- Selective fit, positive capture, stainless steel pin
- No looseness in the hinge to start vibration wear
- No cotter keys to fail
- Anodized for better corrosion and wear resistance
- Replaces part number 0523816-1 and 0523807
The following search filters are active
Click the X next to a filter to remove it.
X Aircraft: Make: Piper
X Exclude products with broad eligibility
X Category: Hinges
Warning: Only showing results for selected aircraft
If you would like to see results for all aircraft:
clear the Aircraft filter
These products are eligible for the aircraft you have selected. If you
cannot find what you are looking for:
clear the Exclude products with broad eligibility filter
Please confirm eligibility for your aircraft or engine by reviewing the product details or contact us.
| Part Number | Description | U/M | Retail Price | Your Price | Stock | |
|
62371-108 |
HINGE, Aileron
Free Shipping on Orders Over $500 |
Each | $186.88 | $133.48 |
|
|
CA35636-100 |
HINGE, Aileron
Free Shipping on Orders Over $500 |
Each | $208.06 | $148.61 |
|
|
CA62002-002 |
STABILATOR TAB HINGE PIN, Outb
Free Shipping on Orders Over $500 |
Each | $9.66 | $6.90 |
|
|
|
CA62002-003 |
STABILATOR TAB HINGE PIN, Cent
Free Shipping on Orders Over $500 |
Each | $14.59 | $10.42 |
|
|
CA62002-004 |
STABILATOR TAB HINGE PIN, Inbo
Free Shipping on Orders Over $500 |
Each | $24.72 | $17.66 |
|
|
CA63560-002 |
STABILATOR TAB HINGE, Outboard
Free Shipping on Orders Over $500 |
Each | $39.95 | $28.53 |
|
|
CA63560-003 |
STABILATOR TAB HINGE, Inboard/
Free Shipping on Orders Over $500 |
Each | $43.26 | $30.90 |
|
|
CA95864-002 |
STABILATOR TAB HINGE HALF
Free Shipping on Orders Over $500 |
Each | $32.41 | $21.72 |
|
|
CA95866-002 |
STABILATOR TAB HINGE HALF
Free Shipping on Orders Over $500 |
Each | $30.20 | $21.57 |
|
|
PTH-KT-1 |
KIT, Trim Hinge, Piper
Free Shipping on Orders Over $500 |
Each | $565.79 | $404.15 |
|
|
PTH-KT-2 |
KIT, Trim Hinge, Piper
Free Shipping on Orders Over $500 |
Each | $458.69 | $319.08 |
|
|
PTP-KT-1 |
KIT, Trim Pin, Piper
Free Shipping on Orders Over $500 |
Each | $73.21 | $52.29 |
|
|
PTP-KT-2 |
KIT, Trim Pin, Piper
Free Shipping on Orders Over $500 |
Each | $83.06 | $59.33 |
|