D A M Exhaust Lubricant

D A M Aircraft Exhaust Anti-seize/Lubricant — The only anti-seize that works!

D A M Exhaust Lube is designed specifically for aircraft exhaust ball joints, clamps, slip joints, and hardware. A low viscosity liquid is blended with molybdenum-disulfide and other special micro-lubricants to produce a protective dry lubricant film. This film embeds into the stainless steel and keeps your joints lubricated for years!

Protects up to 2400° F
No stainless corroding graphite
Prevents heat corrosion and joint lockup
Joints stay free to move with thermal expansion
No greasy powdered metal paste that locks up anyway
Low viscosity — a little goes a long way
Loosens assembled joints

Note: Do not use an anti-seize that contains graphite on your exhaust systems. Graphite corrodes and destroys the grain structure of stainless steel. D A M™ Exhaust Lube does not contain graphite.

Directions:

Shake well.

Pre-assembly: Clean joint and apply a wet coat to both surfaces to be joined. The joint can be assembled wet or dry.

Assembled joints: Apply several times to joint edge. Allow time for capillary action to penetrate the joint. For better penetration of locked up joints, mix 50/50 with acetone, MEK, toluene, or similar solvents.

FOR BEST RESULTS, APPLY BEFORE ASSEMBLY

(Can also be applied to joint edges on older assemblies)

For ordering information, go to Part Number DAM20-4.0.

Shipping Note: This product can only ship via UPS Domestic Ground service. Air and International shipments are not available at this time.