McFarlane Aviation Products FAA-PMA Replacement Aircraft Parts

Superflite Engine Enamel Paint

Since 1949, Superflite has been helping aircraft enthusiasts everywhere build and cover their personal aircraft. We started by developing System I, a butyrate dope system, and expanded that to include System II, the first FAA-approved all urethane aircraft finishing system.

 

Superflite now has System 7, an all-urethane system, which is the most technologically advanced covering system in the world. System 7 has more durability, flexibility, and affordability than anything else on the market today. We’ve designed an aircraft covering system that’s geared toward the aircraft enthusiast – it’s easy to apply, easy to repair, and it provides you with a show-quality finish at a price that’s 20% less than the major competition. 

 

 

Superflite Aircraft Engine Enamel Quarts:


P/N SF2000-1

One quart can of gold paint for Continental engines

Matches the original Continental engine gold color. Developed specifically for air cooled aircraft engines used in the light duty aviation industries.

Note: this color appears more silver than “gold”. 

 

 

P/N SF2100-1

One quart can of grey paint for Lycoming engines

Matches the original Lycoming engine grey color. Developed specifically for air cooled aircraft engines used in the light duty aviation industries.

 

 

P/N SF2200-1

One quart can of gloss black engine paint

Developed specifically for air cooled aircraft engines used in the light duty aviation industries.

 

 

Mixing ratio: Mix well before use. May be used as supplied or for best air spray add 10-15% enamel reducer by volume just prior to application.

 

Pot life: When properly covered at 77ºF, will maintain a sprayable viscosity for an indefinite period of time.

 

Suitable substrates:

·         Properly treated steel or aluminum

·         Epoxy primers

·         Etching primer

 

Surface prep:

·         Wash surface with mild detergent and rinse with water. Dry surface.

·         After drying, sand and featheredge surface where needed.

·         Wipe with a post sanding cleaner following manufacturer’s direction.

 

 

Note: Hazardous product. Before using, read all MSDS, application instructions, and warnings. Always wear properly fitted air purifying respirator with organic cartridges and a particulate filter or a fresh air supplied respirator (depending on product selection), eye protection, gloves, and protective clothing while exposed to any chemical.

*Ground shipping only.

 

 

 

Superflite Aircraft Engine Enamel Aerosol:

 

P/N SF2000-A

12 oz aerosol gold paint spray for Continental engines

Matches the original Continental engine gold color. Developed specifically for air cooled aircraft engines used in the light duty aviation industries.

Note: this color appears more silver than “gold”. 

 

 

P/N SF2100-A

12 oz aerosol grey paint spray for Lycoming engines

Matches the original Lycoming engine grey color. Developed specifically for air cooled aircraft engines used in the light duty aviation industries.

 

 

Mixing ratio: Shake well before use.  

 

Suitable substrates:

·         Properly treated steel or aluminum

·         Epoxy primers

·         Etching primer

 

Surface prep:

·         Wash surface with mild detergent and rinse with water. Dry surface.

·         Mask off or protest areas from overspray.

 

 

Note: Hazardous product. Before using, read all MSDS, application instructions, and warnings. Always wear properly fitted air purifying respirator with organic cartridges and a particulate filter or a fresh air supplied respirator (depending on product selection), eye protection, gloves, and protective clothing while exposed to any chemical.
*Ground shipping only.

 

 

News Articles

Share this article: