Home / Shop Parts / All Products / Exhaust System Components / Valve Guide Cleaning Reamers

Valve Guide Cleaning Reamers

Products in "Valve Guide Cleaning Reamers"

Displaying 1 - 12 of 12 Results

Part #	Description	Retail Price	Your Price
VGR-CN-KT	KIT, Valve Guide Cleaning Reamers, Free Shipping on Orders over $500	$1919.88	$659.16
VGR-CN1	REAMER, Valve Guide Cleaner, Continental Free Shipping on Orders over $500	$336.83	$115.65
VGR-CN2	REAMER, Valve Guide Cleaner, Continental Free Shipping on Orders over $500	$336.83	$115.65
VGR-CN3	REAMER, Valve Guide Cleaner, Continental Free Shipping on Orders over $500	$336.83	$115.65
VGR-CN4	REAMER, Valve Guide Cleaner, Continental Free Shipping on Orders over $500	$336.83	$115.65
VGR-CN5	REAMER, Valve Guide Cleaner, Continental Free Shipping on Orders over $500	$336.83	$115.65
VGR-CN6	REAMER, Valve Guide Cleaner, Continental Free Shipping on Orders over $500	$336.83	$115.65
VGR-LC-KT	KIT, Valve Guide Cleaning Reamers, Free Shipping on Orders over $500	$1629.30	$559.39
VGR-LC1	REAMER, Valve Guide Cleaner, Free Shipping on Orders over $500	$405.81	$139.33
VGR-LC2	REAMER, Valve Guide Cleaner, Free Shipping on Orders over $500	$418.32	$143.62
VGR-LC3	REAMER, Valve Guide Cleaner, Free Shipping on Orders over $500	$391.97	$134.58
VGR-LC4	REAMER, Valve Guide Cleaner, Free Shipping on Orders over $500	$498.94	$171.30

Part No. VGR-CN-KT

KIT, Valve Guide Cleaning Reamers,

Retail Price: $1,919.88

Your Price: $659.16

Part No. VGR-CN1

REAMER, Valve Guide Cleaner, Continental

Retail Price: $336.83

Your Price: $115.65

Part No. VGR-CN2

REAMER, Valve Guide Cleaner, Continental

Retail Price: $336.83

Your Price: $115.65

Part No. VGR-CN3

REAMER, Valve Guide Cleaner, Continental

Retail Price: $336.83

Your Price: $115.65

Part No. VGR-CN4

REAMER, Valve Guide Cleaner, Continental

Retail Price: $336.83

Your Price: $115.65

Part No. VGR-CN5

REAMER, Valve Guide Cleaner, Continental

Retail Price: $336.83

Your Price: $115.65

Part No. VGR-CN6

REAMER, Valve Guide Cleaner, Continental

Retail Price: $336.83

Your Price: $115.65

Part No. VGR-LC-KT

KIT, Valve Guide Cleaning Reamers,

Retail Price: $1,629.30

Your Price: $559.39

Part No. VGR-LC1

REAMER, Valve Guide Cleaner,

Retail Price: $405.81

Your Price: $139.33

Part No. VGR-LC2

REAMER, Valve Guide Cleaner,

Retail Price: $418.32

Your Price: $143.62

Part No. VGR-LC3

REAMER, Valve Guide Cleaner,

Retail Price: $391.97

Your Price: $134.58

Part No. VGR-LC4

REAMER, Valve Guide Cleaner,

Retail Price: $498.94

Your Price: $171.30

Valve Guide Cleaning Reamers for Continental and Lycoming Engines

Why McFarlane Special Reamers?

McFarlane offers special reamers in the necessary sizes to clean your Continental and Lycoming engine exhaust valves. Standard reamers manufactured for aircraft valve guides are designed to perfect the guide hole size when reaming new guides. The standard reamer pilot is sized to fit the small bore of a new unfinished guide to insure stability and a straight finished bore. When this same type of reamer is used to clean the valve guides, the pilot is smaller than the finished hole. This causes the reamer to wander and misalign while it is being started and turned in the guide hole.

The patented McFarlane cleaning reamers have a pilot the same size as the valve stem. This properly sized pilot forces the reamer cutter to start straight and follow the correct valve stem path through the guide hole. Finally, a tool that is designed for the job!

While using standard reamers to clean valve guides, you probably have noticed that you have some valve guide metal in the reamer flutes afterwards. This metal is cut from the sides of the guide when hard carbon deposits displace the unguided reamer from the original guide hole, or the reamer was not started in alignment with the guide hole. Wavy or gouged guide holes cause premature carbon buildup, poor heat transfer, and early guide hole wear. Prevent damage to your valve guides by using McFarlane Cleaning Reamers!

Discounted pricing for a complete set
- P/N VGR-LC-KT for Lycoming engines
- P/N VGR-CN-KT for Continental engines
Spiral flutes for a better guide finish
Pilot sized specifically for cleaning
Cleans guides without notching guide surfaces
Constructed of precision ground, high speed tool steel
Patent # US 9,878,354 B1
Product Demonstration Video

Photo by Jose Oliveros

Note: Reference Lycoming Service Instruction 1425A, SSP-1776 and SSP-578 and the appropriate overhaul manual or the appropriate Continental service information to determine which specific valve guide sizes you have and the required reamer size before purchasing the necessary cleaning reamer. Lycoming Mandatory Service Bulletin No. 388C requires exhaust valve guide cleaning every 300 hours for helicopter engines and every 400 hours for all other engines. McFarlane valve guide reamers are for cleaning carbon build-up only and must not be used for finish reaming of new valve guides.

Part Number	Finished Ream Diameter (Corresponds to valve guide ID)	Pilot Diameter (Corresponds to valve stem diameter)
Lycoming Cleaning Reamers:
VGR-LC-KT	Contains one of each sized reamer
VGR-LC1	0.4040-0.4050	0.4012-0.4020
VGR-LC2	0.4370-0.4380	0.4320-0.4333
VGR-LC3	0.4985-0.4995	0.4935-0.4945
VGR-LC4	0.4995-0.5005	0.4957-0.4965
Continental Cleaning Reamers:
VGR-CN-KT	Contains one of each sized reamer
VGR-CN1	0.3750-0.3758	0.3715-0.3725
VGR-CN2	0.4350-0.4362	0.4310-0.4320
VGR-CN3	0.4365-0.4375	0.4320-0.4330
VGR-CN4	0.4370-0.4378	0.4325-0.4335
VGR-CN5	0.4375-0.4385	0.4330-0.4340
VGR-CN6	0.3427-0.3435	0.3390-0.3400

Maintenance Tip:
Lycoming suggest using ordinary cup grease on the flutes of the reamer to remove deposits with the reamer rather than allowing the deposits to fall into the cylinder.