Home / Shop Parts / All Products / PROP GUARD Anti-Abrasion Boot

PROP GUARD Anti-Abrasion Boot

Documents for "PROP GUARD Anti-Abrasion Boot"

	Title	Article Type
	PROP GUARD Installation Instructions
	PROP GUARD Approved Model List
	2014-03-14 PROP GUARD
	PROP GUARD Adhesion Accelerator P/N: 32965-1 Safety Data Sheet
	PROP GUARD Article Information Sheet

PROP GUARD Anti-Abrasion Boot

McFarlane now owns the STC and has FAA-PMA approval for this great product that has saved aircraft owners countless dollars in propeller maintenance.

Anti-abrasion boot for your metal propeller
It is more economical to protect your propeller blades with PROP GUARD than to continually file, dress, paint and balance your blades until they have to be replaced. Fine sand, rocks, and airborne abrasives are constantly eroding your propeller. As the name suggests, this product can eliminate this destructive process. Virtually all propeller blade failures start as leading edge nicks.

PROP GUARD is a 0.014" thick clear anti-abrasion boot that is bonded to the leading edge of the propeller
PROP GUARD is made from a special high strength heat processed polymer engineered for centrifugal loads. It is NOT just a piece of tape!
Easy to install (approximately 20 minutes installation time)
- Installation Tutorial Video
No performance loss
Fully tested
Repairable
FAA-PMA/STC approved (minor alteration, no form 337 required)

For more information, please see Part Number FP1001 for two blades or Part Number CS1002 for three blades.

Convenient Repair Kits
Repair kits to allow repair of existing PROP GUARD installations. Please see P/N PG-KT-R12 for 12 inches of material or P/N PG-KT-R24 for 24 inches of material.

PROP GUARD Installation Tool
P/N TOOL125 is a rubber coated roller that makes working air bubbles out during installation easier than using the spatula included with the PROP GUARD kits. Saves time and makes installation easier!